material: polycarbonate, ul 94-v2 rev. spc 125 spacer on back of lens), and insert led into lens. description 2. 1 assembly: insert lens through panel hole, (for th in panels less than .188 [4.75mm] thick, slide see notes chamfered. change lens design from fresnel to plain, panel thickness .031 [.8 mm] to .250 [6. 35mm]. panel hole should be deburred, but not 1. .05] panel hole on .375 [9.5mm] centers. 6.35mm .002 [ date initials ul 94-v2 polycarbonate, 3. 4. u.s. & foreign pat. issued & pend. spacer (order separately) smu 4-23-10 revised per ecr111009az01 001 kh 1-7-10 add ul rating to material. notes: mounting: mounts in a .250 revisions ecn# lens color rtp red transparent atp amber transparent gtp green transparent btp blue transparent ytp yellow transparent ctp clear transparent 4-23-10 clr 301 xxx d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 4-23-10 smu dz profile plain lens visual communications company, inc. any break all corners and sharp prohibited. drawn: checked: title: b dwg. no. scale: 1:1 rev do not scale drawing size material proprietary and confidential third angle projection the information contained in this visual communications company, inc is phone (760) 560-1300 fax (760) 560- 1301 emai l vccsales@vcclite.com date finish visual communications company, inc. 190 bosstick boulevard, suite101 san marcos, ca 92069 usa approval drawing is the sole property of edges .030 max without the written permission of reproduction in part or as a whole sheet 1 of 1 1 unless otherwise specified dimensions are in inches: angles decimals 1' . x .020 .xx .010 finish .xxx .005 5mm round low 001 10.92mm .430 6.35mm .250 .280 7.11mm .070 1.79mm .270 6.86mm model ordering code : clr 301 xxx spc 125 led lens assembly spc 125 spacer display panel
|
